FPV Tracker on 2S Lipo – a question from Dave


Tracker versionsI just wanted to know the operating voltage for the FPV RC BEACON, when its signal lead is connected to a RC receiver running directly on a 2S Lipo, which can reach 8.4V when freshly charged. Maybe a glider install.


The FPV tracker does monitor the power and draw a very small current form the power (red wire). Worst case at full charge on the battery, about 0.5mA.


Dave L. UK

We did reply to your original and follow up email, but must be getting lost in the junk filter somewhere.