Low Voltage Relay – Detector – for 24V

$37.00

Low voltage detection relay

Out of stock

SKU: AUS-000101 Category: Tags: , , , , , , ,

Description

This is a 24 Volt monitor relay typically used to signal low battery conditions for solar battery, alarm, security and safety applications.

The DIP switches allow the low voltage trip point to be adjusted. The relay can be inverted. Fail-safe is possible (switch-7 on) energized normally and released for a low voltage alarm condition.

Typically mounted using industrial grade double sided sticky foam tape – we can supply attached to modules if requested.

  • Micro-controller based
  • 16-30VDC supply. typically 3mA (relay off), 25mA (relay on)
  • Reverse polarity protected
  • Changeover contacts, 50V AC/DC 3A rated
  • LED status indicator
  • Large terminals for easy connection
  • Small size
  • Typical setting: 3,5,8 on for approximately 22.6V trip and 25.2V restore
  • Terminals are:  +24V, 0V, common, normally-open, normally-closed
  • Switches 1 to 6 set the trip voltage
  • Switch-7: inverts the relay (off = relay on when tripped)
  • Switch-8: off = reset at trip + 2V : on = reset at 25.2V

Details: Here

This unit is a update of our 12V Low Voltage Relay, HERE.

Reviews

There are no reviews yet.

Be the first to review “Low Voltage Relay – Detector – for 24V”