LOW COST, Small Size |
Low Power, Simple to use |
||
Simplifies I/O expansion |
Use with any small micro |
||
*** . *** |
|||
Info - Connections - Prices - Downloads |
|||
|
INTRODUCTIONThe GPC_5A1 provides an easy way to connect one or more LCD modules to a micro or other controlling device (the master). FEATURES
TO MAKE IT GOThe GPC_5A1 must be connected to a data source (master) and power supply to operate. Note that the power supply can be 10 to 15V DC and must be able to supply enough current for the LED backlighting; typically 50 to 100mA. |
CONNECTIONSThe following table shows the function assigned to each of the 5 connector pins. |
1 |
+12V |
. |
power |
power |
2 |
0V |
. |
power |
power - common |
3 |
Int |
. |
not used |
master interrupt line |
4 |
Data |
. |
input/output |
data - both directions |
5 |
Clock |
. |
input. |
data clock from master |
Prices shown are in New Zealand Dollars and
exclude GST.
Sales outside of New Zealand prices will be charged at the current
exchange rate
GST is only charged on sales within New Zealand
LCD interface |
package |
part number |
1 to 9 |
10 to 24 |
25 up |
GPC_5A1, chip only |
18 pin DIP |
GPC5A1C |
$20.00 |
$16.00 |
$14.00 |
GPC_5A1, module + chip |
complete assembled |
GPC5A1MC |
$40.00 |
$35.00 |
$30.00 |
GPC_5A1 to 2x20 LCD lead, 2x8 header |
300mm long |
GPC5A1HA |
$6.00 |
$5.50 |
$5.00 |
GPC_5A1 to 4x20 LCD lead, 1x16 solder tined end |
300mm long |
GPC5A1HB |
$6.00 |
$5.50 |
$5.00 |
GPC_5A1 to 4x40 LCD lead, 2x10 header (must spec. LCD) |
300mm long |
GPC5A1HC |
$6.00 |
$5.50 |
$5.00 |
Note: The GPC_4A4 is not supplied as
a bare PCB or kit.
(It will not normally be cheaper to source your own parts)
Files available for Download |
||
GPC_5A1 Circuit Diagram (pdf) |
||
. |
. |
. |