In testing This is the next step from the original 6-channel LED flasher-controller. More details. It is able to drive 1 watt and 3 watt LEDs directly without additional resistors and from a 3-6 cell Lipo or 12-30V DC supply. It uses a UBEC mounted on the back to provide […]
I have recently updated the RC LED flasher controller to simplify the flash pattern programming slightly. Originally you needed a LED connected to channel 6 to indicate the pattern count. The small on-board status LED now provides the indication as well as channel 6; which is still useful when the […]
Shop item: HERE Details: HERE I decided to update my 6-channel RC LED flasher. The original design has been working well but had only one flash pattern and only sampled the PPM at the end of each cycle making it appear slow to respond to control changes. So after a […]
