This is a version of our long range tracking transmitter that we have updated to suit multirotors but with a 15-minute delay (was 30-min) and without the beeper.
Transmission begins sooner and does not draw attention to your multirotor while you are tracking it down.
- Same as the first Multirotor Tracker : here but :
- 15-minute delay before transmission begins
- NO beeper
Operation : Before flying simply remove the jumper and fly as normal. If all goes well replace the jumper after landing. If the model decides not to return for any reason the tracker will start transmitting. The matching receiver or a suitable radio scanner can be used for locating the model.
Simple Really : Just mount the tracker in or on the model. No wiring connection to the model is required. It should be mounted so that it is waterproof and protected in a crash.
Receiver Antennas : See the yagi directional antenna product.