Product added here.

This is a in-line PPM buffer or level converter. It normally connects between the RC receiver and whatever it’s controlling, servo, auto-pilot, LED controller etc.

Many modern receivers operate at lower voltages and output PPM signals of 3V or less. Sometimes this low level PPM signal must be buffered before it can be reliably used.

The Servo/PPM Buffer does this. It will operate with input PPM signals as small as about 1V and output a standard 5V PPM signal.

The Servo/PPM Buffer can also be used to level convert output control signals from low voltage controllers. General purpose controllers and RC autopilots etc.

The input is surge protected and the output is overload protected against short term overload or short-circuit.