Corona CT8J Module I’m using a Turnigy 9X transmitter with ER9X firmware and a few different transmitter modules including this Corona DSSS 2.4G. I recently had a few control problems with the Corona DSSS system and finally noticed that tapping the module could make or break the RC link. […]
It’s amazing how many of the tech-talks are poorly recorded. Considering all the experts that must be floating around and the huge community of follow up listeners, you’d think they could at least get the audio levels right. It’s also interesting, actually sad, how many of the speakers try to […]
After 10 or more years of operation there are probably many Smart House or Kristil home automation systems that are beginning to act up. One cause can be ageing power supplies. The older power supplies, some linear and some switch-mode have been operating 24/7 and may have been running warm. […]
I decided that the ESC-BEC caused a problem in my 2M Elegance glider and had to do something about it. A minor crash due to the BEC getting hot and shutting off. The BEC powers a 8-channel 2.4G receiver, 4 small E-Sky digital servos and a couple of LEDs on […]
It was a nice early evening at the flying field. Not too much wind and a bit of lift early on. I was moving the sticks and it just did its own thing. I was stupid enough to do it twice; just to prove there was a problem; yep, confirmed. […]
I recently had another look at using the Raspberry-Pi as a media player with the idea of reducing power draw for general media, web browsing and email. In the past I’ve used XBMC on a modded X-Box. For the last couple of years I’ve used a full-blown PC running KUbuntu […]
I’ve just received a R-Pi from Element-14. They said it would be mid Jan but it arrived late Dec. As with the others I’ve done, I decided to attach a 5V power lead and larger capacitor. See the previous posts. The case is from Soanar; possibly also available from Jaycar. […]
Initial Impressions After seeing the Mele in operation, yesterday I installed Raspbmc on the Raspberry Pi (R-Pi) to see how it compared. No problems during install but it won’t work with the hdmi on our TV. I could probably edit a file to force it to use hdmi; but this […]